| | Speedway R640 |
| Air Interface Protocols | EPCglobal UHF Class 1 Gen 2 / ISO 18000-6C |
| Supported Regions or Geographies | - US, Canada and other regions following US FCC Part 15 regulations (902–928 MHz)
- Europe and other regions following ETSI EN 302 208 without LBT regulations (865–868 MHz)
- Australia, Brazil, China, India, Taiwan, Indonesia, Korea, Malaysia, New Zealand, Thailand, South Africa
|
| Antennas | Dual-Linear Phased Array (DLPA) antenna technology |
| Radiated Power | FCC 4W EIRP, ETSI 2W ERP |
| HPBW (x-z plane) | 60º ± 3º (3dB beam width) |
| HPBW (y-z plane) | 80º ± 3º (3dB beam width) |
| Radome | High impact strength, UV, chemical and cleaning solution resistant |
| Transmit Power | FCC +10 to +28.5 dBm, ETSI +10 to +27.5 dBm |
| Max Receive Sensitivity | -82 dBm |
| Application Interface | EPCglobal Low Level Reader Protocol (LLRP) v1.0.1 |
| Network Connectivity | 10/100BASE-T auto-negotiate (full/half) with auto-sensing MDI/MDX for auto-crossover (RJ-45) |
| IP Address Configuration | DHCP, Static, or Link local Addressing (LLA) with Multicast DNS (mDNS) |
| Time Sychronization | Network Time Protocol (NTP) |
| Management Interfaces | - Impinj Web Management UI
- Impinj RShell Management Console using serial management console port, telnet or SSH
- SNMPv2 MIBII
- EPCglobal Reader Management v1.0.1
- Syslog
|
| Reliable Firmware Upgrade | - Dual image partitions enable smooth transition to new firmware while the reader is still operating
- Scalable upgrade mechanism enabling simultaneous scheduled upgrades of multiple readers
- USB Flash Drive
- Impinj Web Management Interface
|
| Power Sources | - Power over Ethernet (PoE) IEEE 802.3af
- +24 VDC @ 800 mA via external universal power supply with locking connector—sold separately
|
| Environmental Sealing | IEC IP52 |
| Operating Temperature | -20 ºC to +50 ºC |
| Humidity | 5% to 95%, non-condensing |
| Dimensions (H x W x D) | 30.5 x 8.75 x 2 in (77.5 x 22.2 x 5 cm) |
| Weight | 6.5 lbs (3 kg) | |
| Mounting Options | - Keyhole slots, clearance holes, and integrated threaded fasteners (1/4-20 X 1/4")
- VESA MIS-D, 100/75, C (M4 x 7 mm thread depth)
- Conduit knockouts for easy termination of conduit
- Pass-through knockouts on back for data and power cabling
| |
| RoHS | Compliant to European Union directive 2002/95/EC |
