Recently Viewed

Impinj Speedway® Revolution UHF RFID Reader

Impinj Speedway® Revolution UHF RFID Reader
Zoom  Zoom
Our Price:  £795.00(Exc. 20% VAT)
+
Model:  
AC Power Cord UK:  
AC Power Cord EU:  
AC Power Cord USA:  
2 Year Extended Warranty:  
Impinj Uni Power Supply (No AC PowerCord):  
Speedway Connect Software:  

Model:  IPJ-REV-R220-EU11M1


Impinj Speedway® Revolution UHF RFID Readers Available in two port- (Model: R220) and four-port (Model: R420) versions.

Application environments are dynamic. Everything from RF interference, tag quantity, and ambient RF noise to building materials near an RFID installation affect system performance. Most users configure their readers for worst case scenarios, often compromising best performance in the process.

With its innovative Autopilot features, Impinj's Speedway® Revolution UHF RFID reader delivers peak performance—all day, every day.

Downloads            Speedway Reader Evaluation Kits      Speedway xPortal R640

 

Impinj Speedway® Revolution UHF RFID Readers At A Glance

 

Speedway R420 

 Speedway R220

Air Interface Protocol

EPCglobal UHF Class 1 Gen 2 / ISO 18000-6C

Performance    

Includes all possible performance configurations and functionality to deliver peak performance for even the most challenging of applications

Intended for less demanding applications. Does not support the maximum throughput available on R420 including Max Throughput FM0, Hybrid, Max Miller and Autoset Single Reader

Supported Regions and Geographies

  • US, Canada, and other regions following US FCC Part 15 regulations
  • Europe and other regions following ETSI EN 302 208 v1.2.1 without LBT regulations
  • Australia, Brazil, China, India, Japan, Korea, New Zealand, Singapore, South Africa, Taiwan, Uruguay, Indonesia, UAE, Malaysia, Thailand
  • US, Canada, and other regions following US FCC Part 15 regulations
  • Europe and other regions following ETSI EN 302 208 v1.2.1 without LBT regulations
  • Australia, China, India, New Zealand, South Africa, Taiwan, Uruguay, Brazil, Malaysia, Thailand

Antennas

4 high performance, monostatic antenna ports optimized for Impinj reader antennas (RP TNC)

2 high performance, monostatic antenna ports optimized for Impinj reader antennas (RP TNC)

Transmit Power

  • +10.0 to +30.0 dBm (PoE) 
  • +10.0 to +32.5 dBm1 (external universal power supply) 

Note 1: Speedway Revolution requires professional installation, may only be operated with Impinj-approved antennas, and can radiate no more than 36 dBm EIRP per FCC Part 15.247 regulations. Other regulatory regions have similar restrictions. Consult the Installation and Operations Guide to learn more.

Max Receive Sensitivity

-82 dBm

Max Return Loss

10 dB

Application Interface

EPCglobal Low Level Reader Protocol (LLRP) v1.0.1

Network Connectivity

10/100BASE-T auto-negotiate (full/half) with auto-sensing MDI/MDX for auto-crossover (RJ-45)

Cellular Connectivity*

  • Sierra Wireless AirLink PinPoint XT (CDMA or GSM connectivity with GPS data)
  • Sierra Wireless AirLink Raven XT (CDMA or GSM connectivity)

(* Available through Impinj-authorized partners)

IP Address Configuration

DHCP, Static, or Link local Addressing (LLA) with Multicast DNS (mDNS)

Time Sychronization

Network Time Protocol (NTP)

Management Interfaces

  • Impinj Web Management UI
  • Impinj RShell Management Console using serial management console port, telnet or SSH 
  • SNMPv2 MIBII 
  • EPCglobal Reader Management v1.0.1 
  • Syslog 

Reliable Firmware Upgrade

  • Dual image partitions enable smooth transition to new firmware while the reader is still operating 
  • Scalable upgrade mechanism enabling simultaneous scheduled upgrades of multiple reader
  • USB Flash Drive
  • Impinj Web Management UI
      

Management Console

  • RS-232 using a standard Cisco-style management Cable (DB-9 to RJ-45) 
  • Baud rate: 115200; Data: 8 bit; Parity: none; Stop: 1 bit; Flow control: none 

USB

  •  USB 1.1 Device (Type B) and Host (Type A) ports 
  •  USB Virtual COM Serial Port and USB drive support for embedded applications 

GPIO

  • 4 inputs, optically isolated, 3–30V 
  • 4 outputs, optically isolated, 0– 30V, non-isolated 5V, 100 mA supply (DB-15) 

Power Sources

  • Power over Ethernet (PoE) IEEE 802.3af 
  • +24 VDC @ 800 mA via external universal power supply with locking connector—sold separately 

Power Consumption

 

Idle

Typical

LDC

PoE at +30 dBm

3 W

11.5 W

6 W

Power Supply at +30 dBm

3 W

13.5 W

6 W

Power Supply at +32.52 dBm

3 W

15 W

6 W

 

Note 2: Maximum is 31.5 dBm for ETSI region readers

Environmental Sealing

IEC IP52

Shock and Vibration

Mil-Std-810G Certified

Operating Temperature

-20 ºC to +50  ºC

Humidity

5% to 95%, non-condensing

Dimensions (H x W x D)

7.5 x 6.9 x 1.2 in (19 x 17.5 x 3 cm)

Weight

1.5 lbs (0.68kg)

 

RoHS

Compliant to European Union directive 2002/95/EC

*IPJ-REV-R420/R220-GX11M1 is certied or authorized for use in Brazil, Hong Kong, Uruguay, Australia, Israel, Malaysia, Singapore, and Taiwan.
**IPJ-REV-R420/R220-GX21M1 is certied or authorized for use in China, Korea, and South Africa. 


Related Products
Impinj Speedway® Revolution GPIO Box

Impinj Speedway® Revolution GPIO Box£189.00

Impinj Speedway® Revolution GPIO Box

Speedway R420 Revolution RFID Evaluation Kit

Speedway R420 Revolution RFID Evaluation Kit£1,749.00

Speedway R420 Revolution RFID Evaluation Kit

Speedway® xPortal™ RFID Reader System

Speedway® xPortal™ RFID Reader System£1,199.00

Speedway® xPortal™ RFID ReadeR System

Impinj Speedway Revolution Console Cable (DB9 to RJ45)£18.00

Impinj Speedway Revolution Console Cable (DB9 to RJ45)